Tips To Help You Launch Your Hardware Startup Faster

Building a startup from the ground up is hard work—it takes total commitment, sheer determination and a great deal of research. To help you on the last aspect, we have gathered a few of our most popular blog posts related to starting, managing and running a hardware startup for your reference.

I Have A Product Idea—Now What?

For first time entrepreneurs, the product development journey may seem challenging and fraught with obstacles. With so much information available it can be confusing as to what needs to be done first and who you can turn to. In this post we discuss the first five steps of product development to help you dig in and get to work.

How to Avoid Common Hardware Startup Failure Traps

Yes, hardware startups fail and no, that doesn’t mean that yours will. By making yourself aware of the common reasons hardware startups fail, you are preparing yourself, your team and your startup to avoid these roadblocks. The adage may say that “hardware is hard”, but that doesn’t mean it’s impossible—we would even dare say that launching a hardware product has never been easier than it is today.

Hardware Startup: Seeing Opportunities That Others Have Missed

Newcomers to an industry have fresh ideas, new perspectives and innovative ideas. These newcomers are not weighed down by industry norms and the mentality of “it’s always been done this way”. These fresh faces often see opportunities that industry veterans miss.

FAQ: The Basics of Product Development

One thing we have learned over the years is that, no matter the industry, first-time entrepreneurs have some of the same questions and concerns when they first get started. In this post we discuss three frequently asked questions related to product development.

FAQ: The Basics of Intellectual Property and Manufacturing

First-time entrepreneurs, and even seasoned entrepreneurs, have questions when it comes to protecting their intellectual property (IP) and moving forward with manufacturing. No two products are alike; therefore, a custom-tailored strategy is necessary when it comes to navigating these two areas of product development.

Early Product Design Challenges Facing Hardware Startups

It doesn’t matter what industry you are going into or if you are a first-time entrepreneur or serial entrepreneur, you are bound to encounter one or more of these challenges along the way. By understanding what lays ahead as you start your product development journey, you will be better equipped to successfully navigate it.

Three Things Successful Hardware Startup Founders Understand

Hardware startups have many moving parts and are exponentially harder to launch than a typical software startup. Between product prototyping, testing, material selection, manufacturing and quality control (just to name a few), many days it seems like there just isn’t enough time to get it all figured out. There is a lot of time and energy that goes into launching a product before it hits store shelves.

These articles will help you get started and answer many of your preliminary questions as you begin your startup journey. You can also find additional information related to starting a business over on our blog. As always, if you have a specific question and want to chat with an expert, we are happy to help! Send us an e-mail at info@3d-innovations.com, we look forward to talking with you.

_______

3D Innovations is a Product Development Company – from the 3D Design to a fully functional 3D Prototype & Product.

Subscribe to the 3D Innovations newsletter on our Facebook page!

Connect with us on TwitterFacebook & LinkedIn today

 

3D Printing Technology Shines at the Olympics

3D printing technology at the 2018 OlympicsThe US Luge Team tapped 3D printing (also known as additive manufacturing) technology for the XXIII Winter Olympic Games in Pyeongchang, South Korea. Stratasys played a role in helping the US Luge Team go for gold by incorporating additive manufacturing into the sleds being used in this year’s games. However, this is not the first time that 3D printing technology has made an appearance at the Olympic Games.

The 2018  Pyeongchang Olympics

From the Stratasys blog: “The US Luge Team quickly realized the immense potential for additive to gain a competitive advantage and worked with Stratasys engineers to develop an entirely new process for fabricating their composite sleds. In a matter of days, they were able to design, print, and test prototype sled designs, which would normally take weeks or months using their existing processes. This allowed the team to drastically reduce the design cycle, which in turn, allowed for continuous improvement to create the fastest sled possible.”

One of the main competitive advantages of additive manufacturing is its ability for customization. The team saw the value in this, and had sleds developed that fit each of their bodies. “The design freedom from additive manufacturing enabled the team to create customized sleds that were tailored to each athlete’s body, which in turn, drastically improved comfort, ergonomics and most importantly, final performance. It’s really exciting to see how this technology will push the limits of human endurance for Olympic athletes.”

The 2016 Rio Olympics

3D printed apparel was in the spotlight during the 2016 Olympic Games in Rio. These apparel pieces were designed to be lightweight, reduce the amount of wasted energy given off by the athletes and enhance overall performance through custom designs. Examples of where 3D printing technology was used:

  • Nike’s 3D printed silicone protrusions that redirect air flow around runners
  • Adidas’ design suits created via 3D scanners, meant to help swimmers maintain form
  • Assos skinsuits created with 3D technology for the US cycling team
  • Brooks 3D creation of their running shoe, Hyperions
  • New Balance’s 3D printed prototype Vazee Sigma track shoes

BMW also made a splash at the 2016 Rio Olympics with its ability to track Olympic swimmers in the pool. The renowned car company, stepped off the road a dove into the pool with its LED driven motion system.

“The LED trackers will attach to a swimmers’ wrists, shoulders, hips, knees, ankles and toes through a 3D printed mounting system. The stroke and kick motion received by the coaching staff is an incredibly valuable performance tool as the data will aid in breaking down specific limb and joint angles to optimize performance.” (Sport Techie)

The 2012 London Olympics

During the 2012 Olympics in London, customized gear through 3D printing was just starting out.

“The British team was noted for wearing customized helmets, bespoke to each Olympic cyclist. Each of these helmets was based upon a 3D scan of the rider’s head and then 3D printed to verify that the fit of the final helmet would be perfect.” (Stratasys Blog)

Renowned swimming company, Speedo, used 3D printing to create goggles that have transparent parts and rubber-like parts printed in a single step. Optimizing design and streamlining the entire design process are just two of the major advantages of additive manufacturing.

As 3D printing technology continues to grow and advance, we expect to see athletes using it more and more to enhance performance and gain a competitive advantage.

_______

3D Innovations is a Product Development Company – from the 3D Design to a fully functional 3D Prototype & Product.

Subscribe to the 3D Innovations newsletter on our Facebook page!

Connect with us on TwitterFacebook & LinkedIn today

Three Things Successful Hardware Startup Founders Understand

hardware startupHardware startups have many moving parts and are exponentially harder to launch than a typical software startup. Between product prototyping, testing, material selection, manufacturing and quality control (just to name a few), many days it seems like there just isn’t enough time to get it all figured out. There is a lot of time and energy that goes into launching a product before it hits store shelves.

Below are three things all successful hardware startup founders learned:

Build an Exceptional Product

Hardware startups are built on a product vision. Create a product that not only meets customer expectations, but instead exceeds all expectations.

Far too often, we see companies that over promise and under deliver—leaving a wake of frustrated customers behind them. This is a sure-fire way to fail. If you are promising your customers a certain type of product, that should be what you deliver to them.

Focus on Customers

You cannot overemphasize that customers are key.

  • Do you want people to buy your product? Yes.
  • Do you want to build a strong brand? Yes.
  • Do you want to stay in business? Yes.

…Then focus on the needs of your target market. Take care of your customers.

In today’s social media focused world, a hardware startup can find themselves at the center of a major customer backlash with one misstep. People like to share their experiences with companies (both the good and bad)—bad policies, practices and products can be broadcast around the world in seconds. Avoid this headache by listening to your customers, understanding their needs and acknowledging their product improvement suggestions.

Stay In Your Lane

Entrepreneurs must wear many hats in the early days for budgeting purposes—bootstrapping is often seen as a rite of passage for hardware startup founders. The problem occurs when founders try to take on too many tasks they are unqualified for. If you have excellent sales skills, then focus your energy on that area and leave the product design aspect to your engineer. Building a skilled team around your strengths and weaknesses is the essence of true leadership.

“Great leadership entrusts and believes in a collective, skilled team to produce a better product. Poor leaders succumb to ego and attempt to run all facets of the development and release of a product. The results are typically lackluster and not optimal.” (Startup Nation)

_______

3D Innovations is a Product Development Company – from the 3D Design to a fully functional 3D Prototype & Product.

Subscribe to the 3D Innovations newsletter on our Facebook page!

Connect with us on TwitterFacebook & LinkedIn today

Intellectual Property Strategies for Hardware Startups

intellectual propertyIntellectual property (IP) protection is an important consideration for any startup, and possibly even more so for hardware startups. Technology and globalization have made it even easier for companies to copy a product or steal an idea altogether.

Patents are a way to not only protect an idea, but to also minimize competition and act as a defense mechanism against infringement claims from others. Having a strong intellectual property strategy or having the patent process started, is a great way to attract or solidify partnerships and funding.

Below are four considerations for your startup’s intellectual property strategy.

File Early-On

Patent rules are strict and adhere to a tight timeline, so it is best to file for patent protection early-on in the development cycle. A provisional patent application is a good “first step” for hardware startups. A provisional application provides the means to establish an early effective filing date in a later filed nonprovisional patent application. It also allows the term “Patent Pending” to be applied in connection with the description of the invention.

It is important to note that a “provisional application for patent has a pendency lasting 12 months from the date the provisional application is filed. The 12-month pendency period cannot be extended. Therefore, an applicant who files a provisional application must file a corresponding nonprovisional application for patent (nonprovisional application) during the 12-month pendency period of the provisional application in order to benefit from the earlier filing of the provisional application (United States Patent and Trademark Office -USPTO).” Once you file a provisional application the countdown clock starts ticking and your next move must be decided within the 12-month period.

In this early period, it is also best to keep quiet about your invention. You want to avoid publicizing your invention. This does not mean that you cannot meet with potential partners or product development firms, but instead that you don’t want to share your idea online or start a crowdfunding campaign just yet.

File as the Invention Evolves

Many times the invention that you first envisioned, completely transforms during the product development process. This means that your initial patent or patent application may not cover new features that have been added on. This will leave your final product under-protected or not protected at all.

If the product is evolving quickly, consider filing a provisional patent application or a series of provisional patent applications within a year before filing a utility patent application.

Consider a Design Patent

While utility patents make up 90% of patents issued, design patents have been steadily on the rise because inventors are realizing that the exterior design and overall aesthetics of the invention can easily be replicated as well. Protecting both the design and functionality of an invention is necessary for long-term success.

According to the United States Patent and Trademark Office (USPTO), “design patents may be granted to anyone who invents a new, original, and ornamental design for an article of manufacture”. In short, this means that design patents cover exactly what is shown in the drawings, nothing more.

Like a utility patent, a design patent also lets you use the phrases patent pending and patent issued on all business-related material. Once you have been granted a design patent, you are then able to secure rights for the next fourteen years. Another important thing to keep in mind is that design patents are relatively cheap to file and maintain, as compared to a utility patent.

A design patent, coupled with a utility patent, offers a range of IP protection on both the inner workings and exterior design of your product.

Consider Other Brand Protections

Patent protection is only one part of your IP strategy. A registered trademark will help protect your brand as well. A trademark is a word, phrase, symbol or design that identifies and distinguishes the source of the goods of one party from another—think along the lines of logo and tagline. A recognizable trademark can be extremely valuable for distinguishing your business from the competition.

Depending on the exact nature of your startup, a licensing agreement, copyright and/or trade secret protection could also be considered during your intellectual property planning and overall strategy. Speaking to a Patent Attorney early-on will let you discuss your options, weigh the benefits and build a custom strategy for your startup.

_______

3D Innovations is a Product Development Company – from the 3D Design to a fully functional 3D Prototype & Product.

Subscribe to the 3D Innovations newsletter on our Facebook page!

Connect with us on TwitterFacebook & LinkedIn today

Four Common Startup Roadblocks to Success

hardware startupFailure is hard and certainly no one goes into building a startup thinking that they are going to fail—however, it happens. While failing is in no way enjoyable, that doesn’t mean that it does not have its benefits—in terms of learning what not to do. We can all learn from failure, we can even learn from other startup’s failures. Below are four areas where hardware startups have faltered. Making yourself aware of the challenges associated with each of these areas, you are more likely to make educated decisions that (hopefully) allow you to avoid failure altogether.

Wrong Design

Entrepreneurs are designers at heart—they want to design a product, methodology or experience for their target market. They have a brilliant idea and want to introduce it into the marketplace. Design failure can arise rather quickly if the startup founder is not willing to modify their original design idea to meet the needs of customers or manufacturing.

If your customers are asking for your product to function a certain way, feel a particular way or look a specific way, you are going to want to modify your design. At the end of the day, you want people to both purchase and enjoy your product.

When you are working towards commercialization of a product, the goal is to be efficient, minimize costs and get your product onto store shelves quickly—DFM (Design for Manufacturability) works to do just this. With DFM you work out any potential issues before manufacturing planning which saves both time and resources. If you fail to design your product with manufacturing in mind, you are making your startup extremely vulnerable to hefty manufacturing costs and even the potential that it is not able to be manufactured at all.

Reluctance to Get Prototype Feedback

Plenty of hardware startup founders refuse to let anyone see their product until it’s time to launch. Many are afraid that someone will steal their idea, that potential customers won’t like it until it’s perfect, or they want to get a big head start against the competition. Whatever the reason, failure to get feedback is often fatal for a startup.

Feedback is critical during product development. You aren’t going to know if you are on the right track without feedback from your target market. You are going to want people in your target market to test your product (not just family and friends). It is helpful to get feedback that is both honest and actionable. By creating an inexpensive prototype, and gathering feedback from it, you will be in a much better position as you build your product. This feedback loop is important until the final design is ready.

Product/Market Fit

It doesn’t help your startup if you have a beautiful product that works flawlessly if the market for it just isn’t there. For example, if you are positioning an electronic gadget for the 65+ year old crowd you are going to have a hard sell if they are not well versed in the latest technology trends, or if you are targeting the 18-25 year old crowd with a gadget that is overly cumbersome you are going to face an uphill battle. The solution to this is to find out what appeals to the target market you are aiming to capture and design/modify your product to grab and hold their attention.

Funding

This list would not be complete without the mention of funding. Funding is the primary stumbling block for a majority of startups. Developing, manufacturing and launching a product takes time and money. Whether you are turning to crowdfunding or looking for investors, you are bound to face a hurdle or two.

If your goal is to raise capital from investors, be prepared for rejection (a number of times) before you succeed. The process almost always takes longer than you think it will, so start early in your quest to find an investor.

If crowdfunding is your plan, be sure that you show up with a nearly flawless campaign. Your video, content and prototype need to be ready to go. Your goal is to show potential investors that you have a plan laid out, it is well researched and that you are ready.

Starting a hardware company comes with a unique set of challenges. If you can navigate these four common roadblocks, you will be in a much better position for a successful product launch.

_______

3D Innovations is a Product Development Company – from the 3D Design to a fully functional 3D Prototype & Product.

Subscribe to the 3D Innovations newsletter on our Facebook page!

Connect with us on TwitterFacebook & LinkedIn today

The Transformation of 3D Printing Technology

3D printingLess than ten years ago, the hype surround 3D printing technology was at an all-time high. The idea of each household having one led the news cycle. In hindsight, it is clear that this level of hype and the fever-pitch level of excitement was not sustainable or even realistic. There were far too many barriers for the technology to overcome, both technological and usability, before it could be in “everyone’s house”.

Over time the hype slowly diminished, and the technology began to steadily mature. Firms focused on 3D printing began to collaborate, merge and narrow their focus. Today, the future of the technology looks considerably different than it once did. Below are three areas of growth for 3D printing technology and a sign of where the technology is heading.

Industrial 3D Printing

3D printing is making its way onto the manufacturing floor. A recent survey from Jabil, found that “81% of manufacturers are using 3D printing technology today”. It seems that additive manufacturing has found its niche in mainstream manufacturing.

The fact that 3D printing has become so prominent with manufacturers, shows that companies are looking for ways to incorporate this technology into their product designs. Companies are no longer standing on the sidelines waiting to see how the technology matures, but are instead harnessing its design benefits and finding ways to use it themselves.

Material Selection

Where once the only material available was plastic, today there is an ever-increasing range of materials to choose from. The most prominent is still plastic (PLA, ABS, PET, PVA, Nylon) however, metals (steel, gold, silver, titanium), ceramic, and wood options are also quickly coming to market.

New and improved metal 3D printing will make a splash this year. “Metal 3D printing will become more and more of a necessity when solving specific manufacturing challenges and creating customized, complex end-use products.” (Engineering.com) We expect to see the range of materials available to continue to grow as the technology continues to advance.

End-Use Production Parts

Companies, such as GE, are making great strides in advancing 3D printing and its ability to produce end-use products. However, before 3D printing can really take off in terms of end-use production, there are some major barriers that need to be addressed. “Material properties, high costs, complexity, time to a usable part and location of a production-capable machine relegated to an additive manufacturing lab are significant barriers to the use of additive manufacturing in production.” (3D Printing Industry)

Products produced for consumers with 3D printing will be required to meet the same material properties (strength, surface finish, color) that traditional manufacturing has mastered. While it is most likely that end-use production won’t come to fruition in 2018, we can expect to see more companies finding ways of making this happen with one-off parts.

It is clear that additive manufacturing is here to stay. As it is now, this technology continues to excel with its prototyping capabilities and is a great compliment to traditional manufacturing.

_______

3D Innovations is a Product Development Company – from the 3D Design to a fully functional 3D Prototype & Product.

Subscribe to the 3D Innovations newsletter on our Facebook page!

Connect with us on TwitterFacebook & LinkedIn today

Early Product Design Challenges Facing Hardware Startups

3D CAD drawingBelow we discuss four common design challenges facing hardware startups today. It doesn’t matter what industry you are going into or if you are a first-time entrepreneur or serial entrepreneur, you are bound to encounter one or more of these challenges along the way. By understanding what lays ahead as you start your product development journey, you will be better equipped to successfully navigate it.

Originality

The marketplace today is vastly different than it was ten years ago. Consumers today not only want originality and authenticity in the products they purchase, they demand it. However, the thing about originality is that it’s hard. The rise of counterfeit goods, shows just how hard it can be to not only come up with an original business idea, but execute it correctly.

Hardware startups today are relying more and more on the experience and knowledge of their product designers to develop a product that is both externally and internally unique, completely original and visually appealing—so that it outshines the competition and stands out in the marketplace.

It is no secret that the one-size-fits-all approach to product design is losing its luster. Take the Futurecraft 4D shoe from Adidas for example. Adidas is known for its top-of-the-line athletic gear, and have shown that they understand that innovation is necessary with their recently unveiled 3D printed shoe. “3D printing allows the shoe company to unlock performance-enhancing design modifications that would have been impossible with other materials like foam.” (TechCrunch) By incorporating this cutting-edge technology into their design and manufacturing process, Adidas is introducing a truly unique and customizable running shoe into the marketplace.

Product Form

Consumers care about design—hardware startups need to focus in on their product’s physical form, properties and materials. As technology advances, products are becoming slimmer, more light weight and exceptionally durable—in turn, consumers are expecting these characteristics from the products they purchase, not just electronics anymore.

Along with advancing technology, material selection is also advancing. The material expansion with 3D printing alone is ever increasing, today you can expect to see a variety of plastics available for your design (PLA, ABS, PET, PVA, Nylon) however, metals (steel, gold, silver, titanium), ceramic, and wood options are also quickly coming to market.

Technological Advancements

As a startup your main goal is to design, manufacture and launch a product as quickly as possible to turn a profit. However, the vast technological advancements that help throughout the development process, can also be a double-edged sword. You must also design your product with future technologies in mind.

For example, the recent introduction of the Internet of Things (IoT), has created a vast network of interconnected consumer products that work and communicate with one another. Entrepreneurs that incorporate this type of technological foresight into their product design will no doubt have a clear advantage over those who disregard it and look at it as if it’s a passing fad.

Awareness

It can be a challenging enough for well-known companies to create buzz over a new product. For a hardware startup navigating a new industry, these challenges increase exponentially. Not only are you creating awareness around your product, but your company and brand as well.

The internet is a great place to start working on this buzz. Between your website design, social media, partnerships, and customer engagement, it is possible to grab the attention of your target market. More and more entrepreneurs are turning to creative mediums, such as podcasts, videos and interactive websites, to build their brand and launch their startup.

While launching a hardware startup can be intimidating, it is not impossible. Knowing and understanding the challenges facing startups, allows you to have a better idea of what to expect and plan accordingly.

_______

3D Innovations is a Product Development Company – from the 3D Design to a fully functional 3D Prototype & Product.

Subscribe to the 3D Innovations newsletter on our Facebook page!

Connect with us on TwitterFacebook & LinkedIn today

Happy Holidays

December 22, 2017

Our 3D Innovations team would like to wish you and yours a joyous holiday season.

May you have a healthy, peaceful and prosperous New Year full of new adventures!

happy holidays

_______

3D Innovations is a Product Development Company – from the 3D Design to a fully functional 3D Prototype & Product.

Subscribe to the 3D Innovations newsletter on our Facebook page!

Connect with us on TwitterFacebook & LinkedIn today

FAQ: The Basics of Intellectual Property and Manufacturing

intellectual property and manufacturingFirst-time entrepreneurs, and even seasoned entrepreneurs, have questions when it comes to protecting their intellectual property (IP) and moving forward with manufacturing. No two products are alike; therefore, a custom-tailored strategy is necessary when it comes to navigating these two areas of product development.

On the IP side, a decision must be made about what type of patent (design patent or utility patent) makes sense for the invention and budget. On the manufacturing side, everything about the design, even the smallest details, must be accounted for when selecting materials and where to manufacture the product. Having insight and answers early-on in the startup journey helps entrepreneurs understand the full spectrum of what it takes to bring a product to market.

Below we delve into the top three questions we frequently receive related to IP and manufacturing.

Do I need a patent to start my design?

You don’t necessarily need a patent to start the design phase of product development. Often, the design phase is done in parallel with the patent creation process and filing.

Drawings from the design are included as part of the patent application and can be used as attachments to your application. It is recommended to at least file for a Provisional Patent prior to disclosing any information about the product such as designs, prototypes, and specifications to outside parties. You will also want to have your patent in the Patent Pending stage before moving forward with any manufacturing or marketing initiatives.

How will you keep my intellectual property confidential?

Ideas are a “dime a dozen”, but the real intellectual property (IP) is what gets developed, not the idea itself. Developing the functional aspect of the idea is the difficult part. All information is kept confidential and disclosed strictly on a need-to-know basis with the client’s approval.

What process will be used for production manufacturing?

Before entering the production manufacturing phase, several things will be conducted to determine the most cost effective and price friendly option.  Material, surface finish, quantity, and post processing are factors in deciding the appropriate process for production manufacturing.

*This is the second piece in a two-part series, view part one here, FAQ: The Basics of Product Development.

We are happy to answer any additional product development questions you have, please email us at info@3d-innovations.com

_______

3D Innovations is a Product Development Company – from the 3D Design to a fully functional 3D Prototype & Product.

Subscribe to the 3D Innovations newsletter on our Facebook page!

Connect with us on TwitterFacebook & LinkedIn today

FAQ: The Basics of Product Development

product developmentAs a product development firm, we often work with first-time entrepreneurs—people who have a fantastic idea for a product, but need guidance on developing their idea and beginning their startup journey. We help entrepreneurs navigate the wild world of hardware startups.

Our team shares their in-depth knowledge on what it takes to get a project going, what a development plan looks like and what the path of product development entails. By assisting entrepreneurs through their product development journey, we aim to set them up for a successful product launch.

One thing we have learned over the years is that, no matter the industry, first-time entrepreneurs have some of the same questions and concerns when they first get started. Below we discuss three frequently asked questions.

What do I need to provide in order to get my project started?

It only takes a few things to get started. You may think that the littlest details may not make a difference as you start developing an idea, however, every detail matters. Provide as much detail about your product requirements as possible. A good development company will be able to ask you the right questions throughout the development process, to help you narrow down the requirements and focus on the functionality. You don’t need to know all of the technical details about the product, just how it needs to function.

As the adage goes, hardware is hard. However, it is not impossible. It can sometimes be a long and difficult process to develop your hardware project, but aligning yourself with a great development partner will help to make things easier.

Do I retain all rights to the engineering design that is created?

Short answer: It depends. In most cases the answer is yes—you own all of the rights to the design and intellectual property (IP).

In other cases, clients have elected to share equity in their company with product development companies in lieu of paying for development costs, in which case the design and other IP becomes shared property.

How will you prototype my design?

Depending on the type of product, the initial prototype may be a proof-of-concept prototype. This is created to prove out your concept or idea. Some view the proof-of-concept prototype as a feasibility study versus the traditional functional prototype. The prototypes created will serve as a one-off design of your product for you to review, test, and make adjustments before the final production design is created. Be prepared that it may take several iterations to get to the final production ready design, but is an essential part of the development process and should not be skipped.

With a multitude of technologies available to build prototypes, 3D Printing/Additive Manufacturing will be the front runner in prototyping your design. It is cost effective and provides a quick turnaround, which is why it is also commonly referred to as ‘rapid prototyping’. The design will be prototyped in order to test the form, fit, and function and to make sure that the manufacturing process is attainable.

In a subsequent blog post, we will dive into intellectual property and manufacturing, discussing the top questions entrepreneurs have about these subject areas as well. Starting your product development journey with the right information at hand can make all the difference.

We are happy to help answer any additional product development questions you have, please email us at info@3d-innovations.com

_______

3D Innovations is a Product Development Company – from the 3D Design to a fully functional 3D Prototype & Product.

Subscribe to the 3D Innovations newsletter on our Facebook page!

Connect with us on TwitterFacebook & LinkedIn today