Posts Tagged "FOG Safe Drain Guards"

FOG Safe Product Development Process – Pacific Business News

product development process, FOG Safe, FOG Safe Drain GuardsRecently Pacific Business News sat down with our client, Shawn Santos, inventor of FOG Safe Drain Guards to talk about the product development process and launching his idea. FOG Safe Drain Guards are a way to responsibly dispose of fats, oils and grease after cooking a meal, instead of rinsing these harmful contaminants down the kitchen sink. Once the fat, oil and grease has cooled in your cooking pan, you simply pour the contents into the FOG Safe Drain Guard and wait one minute while the drain guard absorbs the FOG, then you dispose of the entire drain guard into the trash. No drips, no mess.

We have had the pleasure of working with FOG Safe from the beginning. We have assisted with designs, prototyping, patents, manufacturing and distribution. Below are excerpts from the Pacific Business News article that discuss our product development assistance (read the full article here).

The Product Development Process

We had several stages of printing for prototyping. I worked with a local product development company, 3D Innovations, through the process. He had resources for using the [3D] printer, so after coming up with designs and going through the process, the finished product is very different than the original idea.

Deciding on a Manufacturer

3D Innovations assisted with sourcing and manufacturing. We looked at several locations, we tried the U.S., and eventually we went overseas. We looked at a lot of paper pulp manufacturers and settled on doing it in China. In order for the product to work and relieve the problem, its gotta be worth it for the consumer. People are not going to want to spend a lot, so we needed to keep the cost down as much as possible.

Then there was the whole tooling process, which is preparing the molds — it’s another upfront cost that comes right out of pocket. We have to provide the schematics for the tooling, and once we approve it it’s all on us, we pay that amount even if that mold doesn’t work, so it’s a bit of a gamble. So we have to be 100 percent, and that’s where the 3D printing comes in. We do the printing, and the manufacturer uses those to make the mold.

Patenting FOG Safe Drain Guards

I have five issued patents. It started with getting a patent attorney and doing a patent search. The hope is that whatever they find is different enough in design, and we felt it was worth the try and we were different.

For my first patent to get issued was well over 24 months, probably closer to 30 months. After that, there were deviations of the design. One of the challenges of an inventor is that you can’t come up with a single design, there needs to be variations, because someone can easily copy off of your original design work. And the patent office is very particular, you can’t be broad, you have to be very specific on a type of design. You can’t just think in one dimension, you have to think about how this can be manipulated and changed. It’s a collaboration between the engineer, myself and my attorney, everyone having input.

Interested in learning more about our product development process? Send us an email at info@3d-innovations.com

______

3D Innovations is a Product Development Company – from the 3D Design to a fully functional 3D Prototype & Product.

Subscribe to the 3D Innovations newsletter on our Facebook page!

Connect with us on TwitterFacebook & LinkedIn today