... Read more →
The month of December is often a quiet time for businesses, and yes, even hardware startups. Right now, businesses everywhere are working to close out 2018, finalizing budgets and forecasts for 2019 as well as taking time off to enjoy the holidays. Your emails are going to receive a higher than average, “Out of Office” reply and your voicemail messages will take a bit longer to be responded to—it’s the December lull. The next two weeks tend to be quiet, but that doesn’t mean that you can’t make this time useful. Below are four ways hardware startups can use holiday “downtime” to their advantage.
If you are just getting off the ground, you are going to need to start this. However, if your hardware startup is up and going, you will want to refine this. Either way, a Product Requirements Document (PRD), is good for business. According to Bolt VC, a PRD adds a tons of value in a few strategic areas: aligning your team, seeing around corners and constraining the design.
Professional Tip: Don’t let your PRD become too cumbersome, the documents that are short and direct are often the most beneficial.
Products don’t sell themselves. Maybe you had some buzz around your crowdfunding campaign, you beat your funding goal and now you believe that your product will be flying off shelves—wrong. You need a marketing strategy. Whether you are a one-man operation or there are a handful of people working on your startup—your hardware startup needs a go-to market strategy. Top hardware startups have a solid marketing strategy that is easily communicated.
Professional Tip: This Forbes Marketing Plan template is an oldie but goodie. It has amassed almost four million views since 2013. It’s a clear marketing roadmap that helps you sculpt a true vision of where you see your business going.
Product development, manufacturing, distributors, retail, channel partners—all of these need to be thoroughly researched and vetted. Take these next two weeks of December to look into potential partnerships and ideal partners. Learn all you can about them, write questions down, research their past and current clients, try to schedule a meeting—all of this research and face-time will payoff.
Here are a few good business articles to consider:
Millions of people now are actively making their goals for the New Year—your hardware startup should be doing the same. Top hardware startups take time to define measurable goals. Take time to critically assess your 2018 goals—what went right, where did you misstep, where did you excel, how can you do better in 2019 and beyond? After you have gone through those goals, set new ones and make sure you have a system in place to keep you on track.
Professional Tip: Setting SMART (specific, measurable, achievable, relevant and timely) goals can help you evaluate the goals you wish to set. Think about whether they are realistic. You should write down your goals in your business plan to help keep you on track to achieve them. (Australian Government—Business)
Take time now to plan ahead and align your startup up for success in the New Year.
3D Innovations is a Product Development Company – from the 3D Design to a fully functional 3D Prototype & Product.
2018 was an excellent year for 3D printing technology and there is no slow down in sight. Below are three major trends to watch for in the additive manufacturing segment in the coming year.
Metals were a new frontier for 3D printing this year. Businesses wanted to expand beyond the traditional materials associated with 3D printing and into something more durable. Where 3D printing metal parts were once costly to produce, new software and updated technology saw a decrease in price and a rise in quality.
“Metal printing is ideal for smaller scale production projects as it lends itself to production flexibility but at the same time is perfect for designs with high complexity.
Metal additive manufacturing (AM) is on the rise, as the material is ideal for producing lighter items at higher production rates. A recent trend has been to utilize it for seats on aeroplanes. Upon completion, they weighed in an astonishing 50% lighter than their regular counterparts at only 766 grams. As the technology moves forward, we can expect forms of metal printing to change the dynamic of industries.” (Tech Magz)
We will no doubt be hearing about end-use production and more affordable 3D metal printing in 2019 and beyond.
Production speed has been a barrier to 3D printing adoption on a mass scale. However, there has been a push by both researchers and 3D printing corporations to increase production speeds, which will help lower this barrier.
“The University of Michigan created an algorithm that reduces vibrations (a significant reason for the reduction of quality of the finished product). Allowing manufacturing speeds to double while producing the same standard of quality, and most importantly to the manufacturers, with no additional hardware costs involved.
In conjunction, MIT engineers developed a desktop printer that has an output times 10 of anything on the commercial market. Using Polymer, fed through the nozzle with a new form of mechanism, it flows faster, and so what would take hours now takes minutes.” (Gadget Miner)
Customization is the “sweet spot” for 3D printing. Major companies and manufacturers have started to take notice that consumers are interested in more customized product options which 3D printing can deliver. The automobile, aerospace and dental industries have been utilizing 3D printings customization ability for years now, but other industries are also starting to take notice.
“Last year Scultpteo’s annual State of 3D printing study showed that offering customized products’ was a top priority for companies who took the survey.
We have seen evidence of this in 2018 with the likes of Adidas, New Balance and Nike already aligning themselves with both household names in the tech and athletics world to experiment with 3D printing to customize their footwear brands that will be designed to the person’s specific biomechanical data.” (Gadget Miner)
As the software advances, materials expand, demand for customization increases and 3D printing production becomes faster, we will see more adoption of the technology across industries. As always, we look forward to the year ahead and can’t wait to see what advancements await.
3D Innovations is a Product Development Company – from the 3D Design to a fully functional 3D Prototype & Product.
Our 3D Innovations team would like to wish you and yours a wonderful Thanksgiving holiday.
“Thanksgiving, after all, is a word of action.” ― W.J. Cameron
In the spirit of the Thanksgiving holiday, we would like to send a big ‘thank you’ to our valued clients. Our clients are the driving motivation and the reason we do what we do. Each project we work on is unique, just like each client. Seeing the excitement build as we assist in the development of taking an idea and turning it into a real-world product fuels our desire to keep helping entrepreneurs launch their dreams.
We are incredibly grateful for our support network and know that our business would not be where it is today without you.
-The 3D Innovations Team
3D Innovations is a Product Development Company – from the 3D Design to a fully functional 3D Prototype & Product.
It’s no secret that additive manufacturing, commonly referred to as 3D printing, is transforming the business landscape. Within the last decade we have witnessed this technology grow into what it is today, a way to disrupt supply chains and completely innovate the manufacturing landscape—from prototyping to production.
3D printing has been a favorite tool of makers and product design professionals alike because of its quick turnaround time and the fact that it is relatively cheap compared to all other manufacturing methods. 3D printing technology allows designers to quickly, easily and efficiently design and produce a product prototype for review within hours, instead of weeks. While prototyping is where additive manufacturing is most popular and widely used, the technology is beginning to mature and find its way into manufacturing for end-use parts as well.
Our design team regularly uses additive manufacturing technology during the product development cycle when we are working with entrepreneurs and startups on prototyping and finalizing a product design. 3D printing technology is still growing and maturing, it seems that every week new filaments are being developed and new uses for the technology are being discussed. However, as the technology stands today, its strength, its competitive advantage and its usefulness remain in the realm of prototyping. Visual and functional prototyping are imperative when designing a product and this is where 3D printing excels.
When it comes to manufacturing, 3D printing technology has an advantage on short-runs, however, at this time, it is not able to compete with other traditional forms on a mass-manufacturing scale.
Due to the speed, quality and cost of additive manufacturing, “the technology is best suited for the production of specialty parts in smaller batches, rather than mass-manufactured goods. However, there is an industry shift towards expanding 3D printing technology to take a more prominent role in mass manufacturing. This technology brings some important qualities to the world of manufacturing that make it ideal for certain jobs. For instance, parts can have complex geometries impossible with traditional manufacturing processes. It is also possible to 3D print goods on demand, allowing for easy creation of custom parts” (Engineering.com).
The 3D printing metal segment is making great strides towards high volume manufacturing and McKinsey forecasts the industry to be worth as much as $10 billion by 2030 to 2035. Read more about developments in the metal 3D printing segment on our blog.
At 3D Innovations, we offer 3D printing services to a range of startups, businesses and makers. If you have a design ready to be printed, and would like a quote, please visit our 3D Printing Quote Request page. We have made the quote process quick and easy. Whether you need a prototype or a short manufacturing run, we can help.
Whether you are considering having your product manufactured in your home country or overseas, you need to take into account the benefits and disadvantages of each before reaching a final decision. Each item on your list should be weighed based on your startup’s goals, mission, customers and timeline. Below you will find a preliminary pros and cons list to help you get started.
Ultimately the decision to manufacture either domestically or internationally is based on your budget, timeline and customer preferences. With our heightened political climate and a shift in attitude, many people now prefer to buy products that are made in the U.S., and are willing to pay more for these products.
Do you have additional questions about manufacturing your product? Send us an email at firstname.lastname@example.org
Coming up with a product idea is exhilarating—knowing that you have an idea that will help not only yourself, but an entire segment of the population, is the very definition of exciting. So now you have an idea, but you aren’t exactly sure what to do next. Below we have gathered helpful advice and insight into the next stages of your product development journey.
It is a common misconception that building a hardware startup is a straightforward and linear process: Find a Problem—Design a Solution—Sell the Product—Make Money. In theory this is how it should work, however in actuality, this process is more of a maze with twists and turns on your way to success.
Each product and each startup will face their own challenges on the way to market; by preparing yourself for any hiccups you encounter along the way, you will be in a much better position to successfully navigate them.
Navigating the world of intellectual property is challenging for seasoned entrepreneurs, and even more stressful when you are working on designing and launching your very first product. Intellectual property (IP) is often moved to the bottom of the priority list because it is full of unknowns. When is the right time to file? Do I need a design patent? Is a trademark necessary?
With the spread of technology and globalization, a solid intellectual property strategy has never been more critical. Copycat products are popping up at an alarming rate—which is bad for business and dangerous for consumers. Having a strong intellectual property strategy early-on or having the patent process started, is a great way to protect your invention, attract or solidify partnerships and secure funding.
The Design Hierarchy of Needs is a good starting point during the product development process. As an entrepreneur, you can look at your product, or product idea, through this lens and determine where your product excels, and which areas need a little more help before your product design is finalized.
We can all learn from failure, we can even learn from other startup’s failures. Making yourself aware of the challenges associated with building and launching a product, you are more likely to make educated decisions that allow you to avoid failure altogether.
Diving into the product development process is an exciting time for an entrepreneur. With the right knowledge and information, you are setting yourself and your startup for success.
We would also suggest you check out these additional blog posts:
Have additional questions about developing your product idea and want to talk to an expert? Send us an email with your questions to email@example.com
Recently Pacific Business News sat down with our client, Shawn Santos, inventor of FOG Safe Drain Guards to talk about the product development process and launching his idea. FOG Safe Drain Guards are a way to responsibly dispose of fats, oils and grease after cooking a meal, instead of rinsing these harmful contaminants down the kitchen sink. Once the fat, oil and grease has cooled in your cooking pan, you simply pour the contents into the FOG Safe Drain Guard and wait one minute while the drain guard absorbs the FOG, then you dispose of the entire drain guard into the trash. No drips, no mess.
We have had the pleasure of working with FOG Safe from the beginning. We have assisted with designs, prototyping, patents, manufacturing and distribution. Below are excerpts from the Pacific Business News article that discuss our product development assistance (read the full article here).
We had several stages of printing for prototyping. I worked with a local product development company, 3D Innovations, through the process. He had resources for using the [3D] printer, so after coming up with designs and going through the process, the finished product is very different than the original idea.
3D Innovations assisted with sourcing and manufacturing. We looked at several locations, we tried the U.S., and eventually we went overseas. We looked at a lot of paper pulp manufacturers and settled on doing it in China. In order for the product to work and relieve the problem, its gotta be worth it for the consumer. People are not going to want to spend a lot, so we needed to keep the cost down as much as possible.
Then there was the whole tooling process, which is preparing the molds — it’s another upfront cost that comes right out of pocket. We have to provide the schematics for the tooling, and once we approve it it’s all on us, we pay that amount even if that mold doesn’t work, so it’s a bit of a gamble. So we have to be 100 percent, and that’s where the 3D printing comes in. We do the printing, and the manufacturer uses those to make the mold.
I have five issued patents. It started with getting a patent attorney and doing a patent search. The hope is that whatever they find is different enough in design, and we felt it was worth the try and we were different.
For my first patent to get issued was well over 24 months, probably closer to 30 months. After that, there were deviations of the design. One of the challenges of an inventor is that you can’t come up with a single design, there needs to be variations, because someone can easily copy off of your original design work. And the patent office is very particular, you can’t be broad, you have to be very specific on a type of design. You can’t just think in one dimension, you have to think about how this can be manipulated and changed. It’s a collaboration between the engineer, myself and my attorney, everyone having input.
Interested in learning more about our product development process? Send us an email at firstname.lastname@example.org
We are sharing product case studies over on the 3D Innovations website. Within these case studies you will see the type of projects we have partnered on and how customers have leveraged our design and manufacturing expertise to reduce time to market. (Note: This is a small sample of our client projects, as many projects are required to stay confidential.)
The case studies on our website are from a range of industries. Below you can see some of the industries we support and have experience working with.
Developing ideas from concept to product is where our expertise shines. With a knowledgeable team, we help bring products from initial concept to store shelves.
3D Innovations provides product development services assisting companies with all stages of development. Our suite of services includes product design/engineering, prototyping, 3D Printing, additive manufacturing, supply chain management, packaging design, and production manufacturing sourcing. Using our experience in Design for Manufacturing (DFM) processes, we develop custom solutions for clients that accelerate their commercialization activities.
We provide 3D Printing and Rapid Prototyping services to quickly validate designs and make improvements for production manufacturing. Experience the benefits of 3D Design and see how 3D Innovations can develop innovative solutions to engineer, design, and manufacture your product.
Interested in learning more about our product development process? Send us an email at email@example.com or give us a call 1.808.722.8667 so that we can schedule a meeting to talk about your project’s individual needs and requirements.
Finding the right product development firm is a big step when it comes to developing your product idea. If you’re trying to decide on whether to work with a product development company, let us help clear up three common misconceptions that many first-time entrepreneurs often have.
False. While some product development companies may focus on one or two areas of product development, there are others that can help you from idea to commercialization. Having a product development team in place through commercialization means that there won’t be any interruption in the product development process. A full-service product development firm is invested in the success of your product and wants to see it on store shelves just as much as you do.
False. Often a product development firm is exactly what you need when it comes to intellectual property. Line drawings are necessary for design and utility patents, and your product development partner can produce these for your patent application. Also, experienced development firms work with IP attorneys and will be able to help answer or questions or setup meetings with experienced attorneys.
When it comes to licensing, your product development partner will be able to provide the technical aspects of the design to interested partners as well as their manufacturers. Licensing a product requires strategy and know-how, and this is exactly what a firm will be able to provide.
False. Successful product development companies have spent years honing their process. They have guidelines and clear steps in place to develop great products. With this knowledge and experience, they should be able to guide you around common pitfalls, in turn saving you both time and money.
With the assistance of a product development firm, you will be guided by knowledgeable experts throughout the entire development process. You can ask questions, share ideas and collaborate on all aspects of the product development process. A skilled product development firm will be able to guide you from design to manufacturing and beyond.
Now it’s time to get out there and meet potential product development partners. In this blog post we discuss what you can expect during your first product development meeting.
Have additional questions about product development? Send us an email at firstname.lastname@example.org.
Taking the leap into manufacturing is a big milestone for a startup. Once you start to search for a manufacturing partner, suddenly it all seems real. Manufacturing is not cheap, and one misstep here can severely hurt or completely crush your business. Finding the right manufacturer is not easy, but with proper planning and research, it can be done. Below are four tips to keep in mind as you research potential partners.
Start your search for a manufacturer that has experience in the industry your product is entering. For instance, if you are manufacturing a baby spoon find a manufacturer that has a great deal of experience in the baby product consumer market segment. Having a manufacturing partner that is knowledgeable about the industry you are entering means that they will be up-to-date with best practices, safety standards, and will have the ability to offer helpful insight.
Not all manufacturers will be able to scale with your business. As your startup grows, the number of units you need will increase as well. Your initial manufacturing partner might be great at prototypes and low volumes, but higher volumes may pose a problem. Minimize production delays, by meeting with other potential manufacturing partners that are able to adequately meet higher volume needs. You don’t have to stick with just one manufacturer.
Depending on your product, one manufacturing strategy is to have multiple open partnerships with manufacturers. Your once very attentive and grateful manufacturer might put you on the back burner when a bigger customer comes along. A vendor list with manufacturers you can utilize or bounce between is a good idea. This keeps pricing between them competitive and the diversification minimizes your business risk.
Your manufacturer is critical to your business, so open communication is mandatory. It is imperative that you know them, and trust them, before working with them. This is true whether you are manufacturing close to home or in another country. Phone calls and emails are great, but a visit to their location is highly recommended. Visiting the facility lets you meet the factory workers and see the facility. You want to feel comfortable that your product is in the right hands, and an on-site visit will do just this.
Don’t forget to check their references. Make those phone calls and get your questions answered by people who have experience with this potential manufacturer.
Now here is what your future manufacturer wants you to know.
Have additional questions about manufacturing your product? We can help. Send us an email with your questions to email@example.com